The Sketcher 1. If a geometric entity or a dimension is displayed in red, this implies that it is:
2. While sketching a __________, you can switch directly to the Arc tool without clicking the Arc tool icon.
3. This is a test
4. You can use the Trim to Closest option of the Trim Entities tool to extend sketch entities.
5. One way to remove an existing sketch entity is to select it and then press the __________ key on the keyboard.
Sketched Features 6. What is the minimum number of sketches needed to create a simple Sweep feature?
7. A loft feature can be created from a single 3D sketch.
8. The Extruded Boss feature can be used to remove material.
9. To create a closed Loft Feature, you must select all of the sketch sections, then select the first sketch again to define it as the start and end sketch.
10. Which option within the Loft PropertyManager is used to control the tangency between the sketch profiles?
Applied Features 11. You can select a planar face as the reference plane for mirroring a feature.
12. It is possible to add material to a part using a Chamfer feature.
13. The triangular volumes that SOLIDWORKS uses to create a mesh of a part are called:
14. Materials in the Material Library are defined by data such as Density and Yield Strength.
15. The keyboard shortcut CTRL+Shift+Z can be used to return to the previous view of the model.
Parts 16. When you create a design table, the toolbars are changed and an embedded Excel application is started.
17. The suppression state of features can be managed by a design table.
18. While creating a design table you are prompted to select which dimensions you want to control in the Design Table.
19. After an extruded feature has been created, you can always go back and edit the feature. When you edit an existing extrude feature, which of the following cannot be changed from the Extrude PropertyManager?
20. You can manage the sizes of features in different configurations using a design table.
Assemblies 21. The (f) in front of the first component listed in the Feature Manager Tree indicates:
22. You can apply a Tangent Mate between a flat face and a cylindrical face.
23. You cannot apply mates between the face of a model and a reference plane.
24. You can use the __________ key from the keyboard to flip the alignment of a mate while creating a smart mate.
25. You can apply the Tangent Mate between a flat face and a sphere.
Views 26. What allows Positions to be more accurately measured than normal coordinate dimensions?
27. To create a specific number of equally spaced points or segments on a line, arc, parabola, circle, spline, ellipse, partial ellipse, or conic, the _________ sketch tool should be used.
28. True or False: For Total Runout, the indicator must be moved parallel to the specified datum axis and kept normal ( perpendicular) to the part surface
29. The automated Formatting Toolbar can be used to change which of the following options for Note Annotations?
30. When a sweep or other basic tools are unable to create a smooth transition between separate bodies, what feature should be used instead?
Dimensions, Etc. 31. If you have created and saved a drawing template in the default Tutorial folder, then that template will be displayed in the Tutorials tab of the New SOLIDWORKS Document dialog box.
32. When applying an ordinate dimension you need to first specify a zero reference.
33. You can modify a driven dimension and the part geometry will also be modified.
34. A Bill of Materials can only be created in the drawings of part files.
35. With the Note Command active, when you roll the cursor over the model, a leader line will appear.
Advanced Parts 36. The Indent Feature can only be used in multibody parts.
37. A Mounting Boss fastening feature can be positioned using...
38. Parting surfaces extend towards the part.
39. To create a Center Line Loft, the center line must intersect each profile and connect points from each profile together.
40. These icons can be found on which toolbar in SOLIDWORKS?
41. What type of fillet can be used to eliminate an entire face?
42. These types of surfaces define the face where the core and cavity blocks will touch.
Advanced Assemblies 43. If a change is made to a mirrored component at the assembly level, both the original and the mirrored component will have that same change.
44. External references are a side effect of creating:
45. The Limit Mate allows you to set limits on what type of motion?
46. What mate should be used to simulate the movement of a pulley?
47. The `In Place` mate is...
48. SOLIDWORKS sets sub-assemblies to be rigid by default. This means __________.
49. When creating a new configuration, you always have to give it a unique name, description, and comment.
Sheet Metal 50. The sheet metal Hem tool _________.
51. The Rip feature is generally used to ________.
52. You can use the sheet metal Corner Trim option to change the part in both its flattened and folded state.
53. You can convert SolidBody parts to sheet metal.
54. In order to select multiple edges for an Edge Flange they must be in contact.
55. Which of the following is not a valid sheet metal Corner Treatment?
56. Sheet Metal Cuts can be found in the...
SimulationXpress 57. SimulationXpress results can be exported as __________.
58. SimulationXpress can optimize a dimension with respect to:
59. If you have a book shelf that you plan to put 25 lbs on, but the shelf will actually hold 100 lbs before it breaks, the shelf would have a factor of safety of:
60. You can use SimulationXpress to analyze the motion of an assembly.
61. If you use a 4000lbs load, choose the Per Item option, and select two faces to apply the load, SimulationXpress applies a total load of 8000lbs.
