The Sketcher 1. If a geometric entity or a dimension is displayed in red, this implies that it is:
2. Which of the following sketch tools does not require one or more existing sketch entities?
3. While in sketch mode, the number displayed to the right of the cursor defines the sketch element`s exact size. Therefore, there is no need to add a dimension to set the dimensional value.
4. The Power Trim tool can be used to extend a line to a target point.
5. One way to remove an existing sketch entity is to select it and then press the __________ key on the keyboard.
Sketched Features 6. Which option needs to be selected from the Revolve Type drop-down list to revolve the sketch symmetrically on both sides of the sketching plane?
7. You can bring up the dimensions used to define a feature by double-clicking on a face of that feature.
8. Which end condition from the Cut-Extrude Property manager is used to cut the entire part?
9. Which of the following features is an applied feature, meaning that it is not defined by one or more sketches?
10. To create a closed Loft Feature, you must select all of the sketch sections, then select the first sketch again to define it as the start and end sketch.
Applied Features 11. What group box in the Hole Wizard PropertyManager should you use if you want to add custom hole parameters for later use?
12. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
13. You can fully define a Reference Axis using two planes.
14. True or False: A Chamfer can be applied to an edge, face, or vertex.
15. If the part you are designing is completely symmetric, you can complete the part by designing just half of the part and using one mirror feature.
Parts 16. Configurations you want to control with a design table must be defined before creating the design table.
17. While creating a design table you are prompted to select which dimensions you want to control in the Design Table.
18. When modifying a feature, you can specify which configuration you want the feature to apply to.
19. After you create a design table, an Excel icon is displayed in the ConfigurationManager Tree which implies that the design table is driving the configuration.
20. After an extruded feature has been created, you can always go back and edit the feature. When you edit an existing extrude feature, which of the following cannot be changed from the Extrude PropertyManager?
Assemblies 21. You cannot flip the alignment of a Coincident mate from the Mates PropertyManager.
22. You can insert a component into an assembly by dragging the .SLDPRT part file from Windows Explorer into the SOLIDWORKS window and dropping it in your assembly.
23. The (f) in front of the first component listed in the Feature Manager Tree indicates:
24. When creating an Exploded View, you can move multiple components at the same time in a single step.
25. You can apply a coincident mate between two edges.
Views 26. For the figure shown, a Positional tolerance is applied to a slotted feature in an alignment plate. Based on this information, select the statement that is NOT correct:
27. To create a body representing the volume of two overlapping bodies one would use which option and feature combination?
28. True or False: For Total Runout, the indicator must be moved parallel to the specified datum axis and kept normal ( perpendicular) to the part surface
29. Which one of the following statements is not correct about Balloons?
30. Which of the following statements is FALSE for profile?
Dimensions, Etc. 31. To save a Custom Sheet Format you should choose ______ from the File Drop Down Menu.
32. You can only use the default configuration of an assembly to drive a Bill of Materials.
33. When you attach a balloon to an edge, it is attached with an arrow.
34. When you attach a balloon to a face, it is attached with an arrow.
35. A Bill of Materials can only be created in the drawings of part files.
Advanced Parts 36. Parting surfaces extend towards the part.
37. __________ faces are those that have both positive and negative draft.
38. The Split feature can be used to ______.
39. These icons can be found on which toolbar in SOLIDWORKS?
40. What type of geometry can be used to create lofts: (A) sketches, (B) surfaces, (C) model faces, or (D) points.
41. The base diameter of a helix is defined:
42. When using the Indent Feature, you can use a Surface Body OR Solid Body as the tool body region.
Advanced Assemblies 43. The main purpose for using assembly Design Tables is to...
44. What are some ways to diagnose mate errors?
45. When creating a new configuration, you always have to give it a unique name, description, and comment.
46. Assembly Features cannot be propagated to the individual part files of the components in which they affect.
47. If a change is made to a mirrored component at the assembly level, both the original and the mirrored component will have that same change.
48. Smart Components can be used to add ______ data to a part when adding it to an assembly.
49. You cannot make changes at the part level while working in an assembly.
Sheet Metal 50. When creating multiple Edge Flanges, which statement is true regarding the arrows that control the direction and the length?
51. The sketch used for a Sketched Bend or Jog does not have to cross the entire surface.
52. When creating a sketch for a sheet metal Base Flange, it`s important to break off any sharp corners with sketch fillets.
53. In order to select multiple edges for an Edge Flange they must be in contact.
54. Sheet metal bend tables are compatible with what type of file listed below?
55. Which of the following is not a valid sheet metal Corner Treatment?
56. You can use the sheet metal Corner Trim option to change the part in both its flattened and folded state.
SimulationXpress 57. You can apply __________ restraints or fixtures in SimulationXpress.
58. Which of the following is a valid load type in SimulationXpress?
59. If you have a book shelf that you plan to put 25 lbs on, but the shelf will actually hold 100 lbs before it breaks, the shelf would have a factor of safety of:
60. Even if you`ve already defined a part`s material in SOLIDWORKS, you can specify a different material in SimulationXpress.
61. You CANNOT use SimulationXpress to help optimize a part based on _______________.
